Garmin 010-00625-00 - Mobile - For BlackBerry 기술 사양 - 페이지 22
{카테고리_이름} Garmin 010-00625-00 - Mobile - For BlackBerry에 대한 기술 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin 010-00625-00 - Mobile - For BlackBerry 26 페이지. Declaration of conformity
Garmin 010-00625-00 - Mobile - For BlackBerry에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지), 제품 정보 (4 페이지), 적합성 선언 (1 페이지)
페이지 인쇄
4. Select the Serial Port to which the GPS 10x is connected. Select Auto to have the program
automatically determine the Baud Rate, or select Manual to manually select the Baud Rate of the GPS
10x. Click OK when done.
Click the Connect icon
, or select Comm > Connect to connect to
the GPS 10x.
5. Place a check mark in the box next to "Binary Output Data" to
change the GPS 10x to Garmin Mode. The unit will keep this
change in the programming until you change it again in the
software.
Note: Selecting Config > Switch to Garmin Mode (or pressing the F11 key) only changes the unit to
work in Garmin Mode until power is cycled through the unit again. For a more permanent change,
refer to step 8 above.
6. Click OK when completed enabling "Binary Output Data."
7. You may disconnect and close the software when finished. The software configuration can also be
saved for future reference.
Refer to
Appendix C: Sensor
Configuration Software for
complete information about
downloading the Sensor
Configuration Software
application.
190-00769-00
GPS 10x Technical Specifications
Page 18
Rev. A