Garmin 010-00625-00 - Mobile - For BlackBerry Технічні характеристики - Сторінка 22

Переглянути онлайн або завантажити pdf Технічні характеристики для GPS Garmin 010-00625-00 - Mobile - For BlackBerry. Garmin 010-00625-00 - Mobile - For BlackBerry 26 сторінок. Declaration of conformity
Також для Garmin 010-00625-00 - Mobile - For BlackBerry: Посібник із швидкого старту (12 сторінок), Інформація про продукт (4 сторінок), Декларація про відповідність (1 сторінок)

4. Select the Serial Port to which the GPS 10x is connected. Select Auto to have the program

automatically determine the Baud Rate, or select Manual to manually select the Baud Rate of the GPS

10x. Click OK when done.

Click the Connect icon

, or select Comm > Connect to connect to

the GPS 10x.

5. Place a check mark in the box next to "Binary Output Data" to

change the GPS 10x to Garmin Mode. The unit will keep this

change in the programming until you change it again in the

software.

Note: Selecting Config > Switch to Garmin Mode (or pressing the F11 key) only changes the unit to

work in Garmin Mode until power is cycled through the unit again. For a more permanent change,

refer to step 8 above.

6. Click OK when completed enabling "Binary Output Data."

7. You may disconnect and close the software when finished. The software configuration can also be

saved for future reference.

Refer to

Appendix C: Sensor

Configuration Software for

complete information about

downloading the Sensor

Configuration Software

application.

190-00769-00

GPS 10x Technical Specifications

Page 18

Rev. A