AEG 30" DEO76 사용자 설명서 - 페이지 19

{카테고리_이름} AEG 30" DEO76에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 30" DEO76 33 페이지. 30” built-in double oven
AEG 30" DEO76에 대해서도 마찬가지입니다: 사용자 설명서 (13 페이지)

페이지 인쇄

To re-fit the oven door:

Holding the door at an angle to the oven, slide the hinges into the oven frame, making sure

that on each side the top curved arm fits into the top slot and the lower arm fits into the

bottom slot.

ii.

Make sure the hinges are pushed as far as they will go and the lower arm engages into the

plate mounted in the oven frame.

iii.

Open the door fully and ensure the pin fully disengages from the hole. The door can now be

opened and as normal.

How to Rotate Doors in the Double and Single Oven

NOTE: Side Opening Only

This should only be done by a qualified person or installer. We recommend that it be a two person task

to ensure support of the heavy door apparatus during changeover. Damage done to the appliance

during a door rotation may effect the warranty provision for the appliance.

Stage1:

REMOVE THE BOTTOM DOOR FOR DOUBLE OVEN OR THE MAIN DOOR FOR

SINGLE OVEN

a) Remove the screws fixing the hinge to the oven front frame, being careful to support the

door, then remove the door and place in a safe place

b) Remove the door catch by removing the two screws top and bottom of the door latch on

the opposite side of the oven front frame to the hinges

c) Remove the screws fitted in the thread holes in the oven front frame to allow the re-

positioning of the door hinge to the opposite side

Stage 2: (FOR DOUBLE OVENS ONLY) REMOVE THE TOP DOOR AS PER STAGE 1 ABOVE AND

LEAVE IN POSITION THE FITTED MIDDLE SPACER

Remove the screws fixing the bracket of the middle spacer profile

Remove the screws fixing the hinge of the top door

Remove the door with the middle profile fixed to the hinge, rotate 180° place in a safe place

ready for re-affixing

Stage 3: FITTING THE DOORS – FOR DOUBLE OVENS AND SINGLE OVENS