AEG 79669GO-MN 사용자 설명서 - 페이지 19

{카테고리_이름} AEG 79669GO-MN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 79669GO-MN 48 페이지.

BEFORE USING THE APPLIANCE – GAS HOB MODEL (CONTINUED)

Installing the standard burners

The burner crown must be fitted correctly onto

the burner cup or damage will occur during

operation .

2 .

To do this, align the outer hole and outer recess

of the burner crown around the spark plug and

flame safeguard sensor. Drop down ensuring the

location ribs on the bottom of the crown drop

into the location recesses .

3 .

Burner cap and burner crown must be clean and

located correctly for the burner to light .

Installing the wok burners

The wok burner crowns must also be fitted

correctly onto the wok burner cups .

2 .

To do this, align the outer recess of the burner

crown around the spark plug . Drop down

ensuring the location of the ribs on the bottom of

the crown drop into the location recesses .

3 .

The 2 burner caps are simply positioned over the

top of the burner crown .

NOTE: When the burners are correctly fitted they will

sit level on the hob .