Alinco DR-135 딜러 매뉴얼 - 페이지 6

{카테고리_이름} Alinco DR-135에 대한 딜러 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alinco DR-135 20 페이지. Vhf fm mobile transceiver

2.2 Setting Up the Transceiver with the CH Data Editor

This section describes how to configure the transceiver as a Data-Indication-

mode unit with the CH Data Editor software.

The function of "Appendix A" (on page 15) can be programmed only through

CH Data Editor software.

To set up the transceiver with the CH Data Editor:

Connect the COM port (Dsub connector) on your computer to the external

speaker jack on the transceiver with the ERW-4 or ERW-4C interface

cable.

DATA terminal

Start the Channel Data Editor on your computer. On the main menu, press

the F3 key, and select the "Radio Option (R)" option. In the "Edit option

data" window, select the "Channel" option in the "Indication Mode" field.

Write your changes in the transceiver memory. The transceiver will then

enter the Channel Indication mode. For more information about using the

software, see chapter 3 "DR-135 Channel Data Editor".

DR-135

(Front panel)

ERW-4 or ERW-4C interface cable

Computer