Garmin Zumo XT 소유자 매뉴얼 - 페이지 40
{카테고리_이름} Garmin Zumo XT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Zumo XT 49 페이지.
Garmin Zumo XT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (46 페이지)
페이지 인쇄
Installing Your Device in the Motorcycle
Mount
1 Fit the bottom of your device into the
cradle.
2
Push the top of the device forward until it snaps
into place.
The latch (D on the mount stays up after you
insert the
device.
Removing Your Device from the
Motorcycle Mount
1
Press the release button on the top of the mount.
2
Lift out the
device.
Mounting Your Device in an
Automobile
NOTICE
Before mounting the device, check the local laws
pertaining to windshield mounting.
This product contains a lithium-ion battery. To
prevent the possibility of personal injury or product
damage caused by battery exposure to extreme
heat,
store the device out of direct sunlig~
Do not use the suction cup mount on a motorcy~
See the Important Safety and Product Information
guide
in
the product box for product warnings and
other important
infonnation.
NOTE:
The automobile mount is not included with all
device models. Go to garmin.com to purchase
optional
accessories.
1
Plug the automotive power cable (D
into
the port
®
on the
device.
2
Remove the clear plastic from the suction
cup@.
3
Clean and dry your windshield and the suction
cup with a lint-free cloth.
4
Press the suction cup to the windshield, and flip
the lever© back toward the
windshield.
5
Snap the cradle @onto the suction cup arm.
6
Fit the bottom of your device into the
cradle.
7
Press the device into the cradle until
it
snaps
Into
place.
8
Plug the other end of the automotive power cable
into
a power outlet.
3