Garmin APPROACH S62 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Garmin APPROACH S62에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin APPROACH S62 24 페이지.
Garmin APPROACH S62에 대해서도 마찬가지입니다: 소유자 매뉴얼 (24 페이지)

페이지 인쇄

Hold Menu.

Select Settings > Wrist Heart Rate > Abnormal HR Alert >

Threshold.

Select a heart rate threshold value.

Each time you exceed the custom value, a message appears

and the device vibrates.

Broadcasting Heart Rate to Garmin Devices

You can broadcast your heart rate data from your Approach

device and view it on paired Garmin devices. For example, you

can broadcast your heart rate data to an Edge

cycling.

NOTE: Broadcasting heart rate data decreases battery life.

Hold Menu.

Select Settings > Wrist Heart Rate.

Select an option:

• Select Broadcast In Activity to broadcast heart rate data

during timed activities

• Select Broadcast to start broadcasting heart rate data

now.

Pair your Approach device with your Garmin ANT+

compatible device.

NOTE: The pairing instructions differ for each Garmin

compatible device. See your owner's manual.

Turning Off the Wrist-based Heart Rate Monitor

The default value for the Wrist Heart Rate setting is Auto. The

device automatically uses the wrist-based heart rate monitor

unless you pair a chest heart rate monitor to the device. Chest

heart rate data is only available during an activity.

NOTE: Disabling the wrist-based heart rate monitor also

disables your VO2 max. estimate, intensity minutes, the all-day

stress feature, and the wrist-based pulse oximeter sensor.

Hold Menu.

Select Settings > Wrist Heart Rate > Status > Off.

Pulse Oximeter

The Approach S62 device has a wrist-based pulse oximeter to

gauge the saturation of oxygen in your blood. Knowing your

oxygen saturation can help you determine how your body is

adapting to exercise and stress. Your device gauges your blood

oxygen level by shining light into the skin and checking how

much light is absorbed. This is referred to as SpO

On the device, your pulse oximeter readings appear as an SpO

percentage. On your Garmin Connect account, you can view

additional details about your pulse oximeter readings, including

trends over multiple days

(Changing the Pulse Oximeter

Tracking Mode, page

10). For more information on pulse

oximeter accuracy, go to garmin.com/ataccuracy.

Getting Pulse Oximeter Readings

You can manually begin a pulse oximeter reading by viewing the

pulse oximeter widget. The accuracy of the pulse oximeter

reading can vary based on your blood flow, the device

placement on your wrist, and your stillness.

NOTE: You may need to add the pulse oximeter widget to the

widget loop.

While you are sitting or inactive, swipe up or down to view the

pulse oximeter widget.

Hold the arm wearing the device at heart level while the

device reads your blood oxygen saturation.

Keep still.

The device displays your oxygen saturation as a percentage,

and a graph of your pulse oximeter readings and heart rate

values for the last four hours.

device while

(Starting an Activity, page

6).

Changing the Pulse Oximeter Tracking Mode

You can manually begin a pulse oximeter reading by viewing the

pulse oximeter widget.

Hold Menu.

Select Settings > Wrist Heart Rate > Pulse Ox > Tracking

Mode.

Select an option:

• To turn on measurements while you are inactive during

the day, select All Day.

NOTE: Turning on all-day tracking mode decreases

battery life.

• To turn on continuous measurements while you sleep,

select During Sleep.

NOTE: Unusual sleep positions can cause abnormally low

sleep-time SpO2 readings.

• To turn off automatic measurements, select Off.

Tips for Erratic Pulse Oximeter Data

If the pulse oximeter data is erratic or does not appear, you can

try these tips.

• Remain motionless while the device reads your blood oxygen

saturation.

• Wear the device above your wrist bone. The device should

be snug but comfortable.

• Hold the arm wearing the device at heart level while the

device reads your blood oxygen saturation.

• Use a silicone band.

• Clean and dry your arm before putting on the device.

• Avoid wearing sunscreen, lotion, and insect repellent under

the device.

• Avoid scratching the optical sensor on the back of the device.

• Rinse the device with fresh water after each workout.

Customizing Your Device

Changing the Watch Face

Before you can activate a Connect IQ watch face, you must

install a watch face from the Connect IQ store

Features, page

8).

From the watch face, select Menu > Watch Face.

Swipe up or down to view the watch faces.

Tap the screen to select a watch face.

Customizing the Controls Menu

You can add, remove, and change the order of the shortcut

menu options in the controls menu.

Hold Menu.

The controls menu appears.

Select Menu > Controls Settings.

Tap the shortcut you want to customize.

Select an option:

• To change the location of the shortcut in the controls

menu, tap the location where you want it to appear.

• To remove the shortcut from the controls menu, tap .

If necessary, select

Golf Settings

From the watch face, select Menu > Settings > Apps &

Activities > Play Golf > Golf Settings.

Scoring: Allows you to set the scoring options

Settings, page

11).

(Connect IQ

to add a shortcut to the controls menu.

(Scoring

Customizing Your Device