Garmin Fenix 3 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Garmin Fenix 3에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fenix 3 26 페이지. Gps watch garmin fenix 3
Garmin Fenix 3에 대해서도 마찬가지입니다: 소유자 매뉴얼 (28 페이지)

페이지 인쇄

3D Speed and Distance

You can set 3D speed and distance to calculate your speed or

distance using both your elevation change and your horizontal

movement over ground. You can use it during activities such as

skiing, climbing, navigating, hiking, running, or biking.

Using Auto Scroll

You can use the auto scroll feature to cycle through all of the

activity data screens automatically while the timer is running.

Hold UP.

Select Settings > Apps.

Select an activity.

NOTE: This feature is not available for all activities.

Select Auto Scroll.

Select a display speed.

UltraTrac

The UltraTrac feature is a GPS setting that records track points

and sensor data less frequently. Enabling the UltraTrac feature

increases battery life but decreases the quality of recorded

activities. You should use the UltraTrac feature for activities that

demand longer battery life and for which frequent sensor data

updates are less important.

Power Save Timeout Settings

The timeout settings affect how long your device stays in

training mode, for example, when you are waiting for a race to

start. Hold UP, select Settings > Apps, and select an activity.

Select Power Save to adjust the timeout settings for the activity.

Normal: Sets the device to enter low-power watch mode after 5

minutes of inactivity.

Extended: Sets the device to enter low-power watch mode after

25 minutes of inactivity. The extended mode can result in

shorter battery life between charges.

Watch Face Settings

You can customize the appearance of the watch face by

selecting the layout, colors, and additional data. You can also

download custom watch faces from the Connect IQ store.

Customizing the Watch Face

Hold UP.

Select Settings > Watch Face.

Select a watch-face feature to change.

Follow the on-screen instructions to change the watch-face

feature.

Customizing the Widget Loop

You can add, delete, or move items in the widget loop.

Hold UP.

Select Settings > Widgets.

Select a widget.

Select an option:

• Select Show to show or hide the widget from the widget

loop.

• Select Move Up or Move Down to change the location of

the widget in the widget loop.

Sensors Settings

Compass Settings

Hold UP, and select Settings > Sensors > Compass.

Display: Sets the directional heading on the compass to

degrees or milli-radians.

North Ref.: Sets the north reference of the compass

North

Reference).

Mode: Sets the compass to use electronic-sensor data only

(On), a combination of GPS and electronic-sensor data when

moving (Auto), or GPS data only (Off).

Calibrate: Allows you to manually calibrate the compass sensor

(Calibrating the

Setting the North Reference

You can set the directional reference used in calculating

heading information.

Hold UP.

Select Settings > Sensors > Compass > North Ref..

Select an option:

• To set geographic north as the heading reference, select

True.

• To set the magnetic declination for your location

automatically, select Magnetic.

• To set grid north (000º) as the heading reference, select

Grid.

Calibrating the Compass

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

Hold UP.

Select Settings > Sensors > Compass > Calibrate.

Follow the on-screen instructions.

Altimeter Settings

Hold UP, and select Settings > Sensors > Altimeter.

Auto Cal.: Allows the altimeter to self-calibrate each time you

turn on GPS tracking.

Calibrate: Allows you to manually calibrate the altimeter sensor.

Calibrating the Barometric Altimeter

Your device was already calibrated at the factory, and the

device uses automatic calibration at your GPS starting point by

default. You can manually calibrate the barometric altimeter if

you know the correct elevation or the correct sea level pressure.

Hold UP.

Select Settings > Sensors > Altimeter.

Select an option:

• To calibrate automatically from your GPS starting point,

select Auto Cal. > Once.

• To calibrate automatically with periodic GPS calibration

updates, select Auto Cal. > Continuous.

• To enter the current elevation, select Calibrate.

Barometer Settings

Hold UP, and select Settings > Sensors > Barometer.

Plot: Sets the time scale for the chart in the barometer widget.

Storm Alert: Sets the rate of barometric pressure change that

triggers a storm alert.

System Settings

Hold UP, and select Settings > System.

User Profile: Allows you to access and customize your personal

statistics.

Language: Sets the language displayed on the device.

(Setting the

Time: Adjusts the time settings

Compass).

NOTICE

(Time

Settings).

Customizing Your Device