Garmin GNS 530 매뉴얼 - 페이지 21

{카테고리_이름} Garmin GNS 530에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GNS 530 35 페이지. Supplement a21 to the airplane flight manual da 40 diamond com/nav/gps
Garmin GNS 530에 대해서도 마찬가지입니다: 파일럿 매뉴얼 (22 페이지), 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (27 페이지), 파일럿 매뉴얼 부록 (4 페이지), 빠른 참조 (16 페이지), 브로셔 (1 페이지), 빠른 참조 (23 페이지), 파일럿 매뉴얼 부록 (22 페이지), 설치 매뉴얼 (14 페이지)

DA 40 AFM

The message page will appear and display the status or warning information

applicable to the receiver´s current operating condition.

To return to the previous page after viewing a message, press MSG again.

SELECTING COM/NAV FREQUENCIES

The GNS 530´s display is divided into separate 'windows' (or screen areas), including

a COM window, VLOC window and the GPS window (the right 3/4 of the display).

Pushing the small left knob (1) moves the tuning cursor back-and-forth between the

COM and VLOC frequency window. To select the active frequency, you must first

enter the frequency in the standby field, and use the COM flip-flop (6) (or the VLOC

flip-flop (4)) key to move it to the active field.

To change the standby communication frequency:

Press the small left knob (1) if needed, to move the tuning cursor to

the COM window

Rotate the large left knob (2) to select the MHz, and the small left

knob (1) to select the kHz of the desired frequency

To place the standby communication frequency in the active field, press the

COM flip-flop key (6).

Doc. # 6.01.01-E

Rev. 0

01 Dec 2001

Supplement A21

GNS 530

Page 9 - A21 - 20