Garmin GNS 530 Handmatig - Pagina 21

Blader online of download pdf Handmatig voor {categorie_naam} Garmin GNS 530. Garmin GNS 530 35 pagina's. Supplement a21 to the airplane flight manual da 40 diamond com/nav/gps
Ook voor Garmin GNS 530: Handleiding voor piloten (22 pagina's), Gebruiksaanwijzing (6 pagina's), Handleiding voor piloten Addendum (27 pagina's), Handleiding voor piloten Addendum (4 pagina's), Snelle referentie (16 pagina's), Brochure (1 pagina's), Snelle referentie (23 pagina's), Handleiding voor piloten Addendum (22 pagina's), Installatiehandleiding (14 pagina's)

DA 40 AFM

The message page will appear and display the status or warning information

applicable to the receiver´s current operating condition.

To return to the previous page after viewing a message, press MSG again.

SELECTING COM/NAV FREQUENCIES

The GNS 530´s display is divided into separate 'windows' (or screen areas), including

a COM window, VLOC window and the GPS window (the right 3/4 of the display).

Pushing the small left knob (1) moves the tuning cursor back-and-forth between the

COM and VLOC frequency window. To select the active frequency, you must first

enter the frequency in the standby field, and use the COM flip-flop (6) (or the VLOC

flip-flop (4)) key to move it to the active field.

To change the standby communication frequency:

Press the small left knob (1) if needed, to move the tuning cursor to

the COM window

Rotate the large left knob (2) to select the MHz, and the small left

knob (1) to select the kHz of the desired frequency

To place the standby communication frequency in the active field, press the

COM flip-flop key (6).

Doc. # 6.01.01-E

Rev. 0

01 Dec 2001

Supplement A21

GNS 530

Page 9 - A21 - 20