Aliyiqi HF-500 빠른 시작 매뉴얼 - 페이지 10

{카테고리_이름} Aliyiqi HF-500에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aliyiqi HF-500 15 페이지. Hf digital display push-pull force gauge

Press \"Settings \" key in the boot state, the display is \"TEST \", then press \"

options. \" HIDT \", \" LODT \", \" STOP \", \" LOSET \", \" OFFT \", \" PE.SET \", \"GSET \", \"BACSET \",

\"RESET \". As shown below:

(HIDT) Test value upper limit setting: Set the test value upper limit, the upper limit default state is

99% of full scale. Above the upper limit is out of range, \"MAX \" is displayed. If you want to reset the upper limit,

use \"

\"Key and \"

(LODT) Test value lower limit setting: Set the test value lower limit, the default value is 0 by default.

Below the lower limit is out of range, \"MIN \" is displayed. If you want to reset the lower limit, it is similar to the

previous operation, use \"

(STOP) The machine stop value setting, the default state is 99% of full scale. This product is used in

combination with our own motor table. When the test value exceeds the set machine stop value, the instrument

outputs a 5V signal and the machine receives the signal.

Operation method of this function:

\"Key setting. \" Save \"and return to the setting item interface. As shown below:

\"Key and \"

\"Key setting. \" Save \"and return to the setting item interface.

\"Key, you can view the setting