Garmin GNC 250 유지보수 및 수리 매뉴얼 - 페이지 20

{카테고리_이름} Garmin GNC 250에 대한 유지보수 및 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GNC 250 20 페이지. Garmin gnc 250: quick reference
Garmin GNC 250에 대해서도 마찬가지입니다: 파일럿용 빠른 참조 매뉴얼 (25 페이지), 설치 매뉴얼 (44 페이지)

페이지 인쇄
Garmin GNC 250 유지보수 및 수리 매뉴얼
MESSAGE (cont.)
Transmitter demodulated
audio is distorted or
noisy
Display does not show tx
indicator when mic is
keyed.
RECOMMENDED REPAIR (cont.)
Check output from 28v to 14v converter if so
equipped. Replace converter if output voltage is
higher than 15VDC
Check comm antenna in installation for intermittent
connection and/or high VSWR.
Verify connections from CPU Board to modulator
transistor Q34 and from Q34 to transmitter.
Verify connection between CPU Board and Comm
Receiver Board.
Replace comm chassis sub-assembly (see Section 3.2.2,
steps 1-7).
Replace modulator transistor Q34 (see Section 3.2.2,
steps 8-14)
Replace CPU Board (see Section 3.2.4)
Verify connection to external mic key.
Verify connection between CPU Board and Comm
Receiver Board.
Replace comm chassis sub-assembly (see Section 3.2.2,
steps 1-7).
Replace CPU Board (see Section 3.2.4)
17