Garmin GNS 430A 빠른 참조 - 페이지 19

{카테고리_이름} Garmin GNS 430A에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GNS 430A 23 페이지. Friendlypanels gps for microsoft fs9 & fsx
Garmin GNS 430A에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지), 파일럿 매뉴얼 부록 (27 페이지), 파일럿 매뉴얼 부록 (4 페이지), 파일럿 매뉴얼 부록 (22 페이지), 사양 (2 페이지), 운영 매뉴얼 (27 페이지)

페이지 인쇄

Turn the large right knob to highlight 'Load?'

or 'Activate?' and press the ENT Key. ('Load?'

adds the procedure to the ﬂight plan without

immediately using it for navigation guidance.

This allows the pilot to continue navigating the

original ﬂight plan, but keeps the procedure

available on the Active Flight Plan Page for

quick activation when needed.)

For precision approaches and some non-

precision approaches, a reminder window

appears indicating that GPS guidance on

such approaches is strictly for monitoring only

— use the VLOC receivers and external CDI

(or HSI) for primary navigation. To conﬁrm this

reminder, highlight 'Yes?' and press the ENT

Key.

Not all approaches in the database are approved for GPS

use. As the pilot selects an approach, a 'GPS' designation

to the right of the procedure name indicates the procedure

can be ﬂown using the GPS receiver. Some procedures

do not have this designation, meaning the GPS receiver

may be used for supplemental navigation guidance only.

ILS approaches, for example, must be ﬂown by tuning the

VLOC receiver to the proper frequency and coupling the

VLOC receiver to the external CDI (or HSI).

A selected approach may be activated or loaded. Once

an approach is selected, it may be activated for navigation

from the Procedures Page.

overrides the 'enroute' portion of the active ﬂight plan,

proceeding directly to the 'approach' portion (for a full

approach, directly to the initial approach ﬁx). Activating

the approach also initiates automatic CDI scaling transition

as the approach progresses.

In many cases, it may be easiest to 'Load' the full

approach while still some distance away, enroute to the

destination airport. Later, if vectored to ﬁnal, use the

following steps to select 'Activate Vector-To-Final'—which

makes the inbound course to the ﬁnal approach ﬁx (FAF)

waypoint active. Otherwise, activate the full approach

using the 'Activate Approach?' option.

TO ACTIVATE AN APPROACH

With an approach loaded in the active ﬂight

plan, press the PROC Key to display the

Procedures Page.

Turn the large right knob to highlight 'Activate

Approach?' and press the ENT Key.

The 'Activate Vector-To-Final?' option allows the pilot

to activate the ﬁnal course segment of the approach. This

option assumes the pilot will receive vectors to the FAF

and provides guidance to intercept the ﬁnal course, before

reaching the FAF.

GNS 430 Quick Reference

ACTIVATE AN APPROACH

Activating the approach