Garmin Fishfinder 240 Blue 소유자 매뉴얼 - 페이지 24

{카테고리_이름} Garmin Fishfinder 240 Blue에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 240 Blue 50 페이지. Garmin fishfinder 160 blue owner's manual
Garmin Fishfinder 240 Blue에 대해서도 마찬가지입니다: 소유자 매뉴얼 (50 페이지), 소유자 매뉴얼 (50 페이지), 파일럿 매뉴얼 (12 페이지), 사양 (2 페이지), 사양 (2 페이지), 소유자 매뉴얼 (50 페이지)

페이지 인쇄

www.reelschematic.com

Unit Operation

Setup Menu: Chart Tab

Fish Symbols

Arches wil be displayed representing suspended targets.

—

All available backgroud information will be displayed.

Suspended targets displayed as symbols. In this mode,

—

background information will still be displayed making

ﬁ sh identiﬁ cation easier.

Same as above, with target depth displayed.

—

Suspended targets displayed as symbols. No background

—

information will be displayed in this mode.

Same as above, with target depth displayed.

—

Frequency (continued)

The wide cone angles associated with low frequencies (40° for 50kHz)

provide a large coverage area for ﬁ nding ﬁ sh. However, this also means that

wide cone angles produce less bottom detail and resolution. The narrow

cone angles associated with high frequencies (10° for 200kHz) provide

better bottom resolution and crisper detail, but therefore cannot show a

large coverage area for ﬁ nding ﬁ sh. Dual frequency mode combines the

improved contour detail and depth readings of the 200kHz frequency with

the wide coverage area of the 50kHz frequency.

To select a Frequency:

1. Highlight the 'Chart' tab on the Setup Menu.

2. Highlight the 'Frequency' selection ﬁ eld and press ENTER.

3. Using the UP or DOWN Arrow, choose '200kHz,' 50kHz' or 'Dual' and

press ENTER. The selected frequency will be displayed in the bottom

left-hand corner of the chart.

Fish Symbols

'Fish Symbols' allows the user to determine how the chart will display

underwater targets and background information. If 'Fish Symbols' is set

to 'Off,' the unit will display all of the available information about the

underwater environment. If a fish symbol is selected, the chart will display

only the information related to that symbol.

To select a Fish Symbol:

1. Highlight the 'Chart' tab on the Setup Menu.

2. Highlight the 'Fish Symbols' selection ﬁ eld and press ENTER.

3. Using the UP or DOWN Arrow, select the desired symbol and press

ENTER.