Garmin Fishfinder 240 Blue 소유자 매뉴얼 - 페이지 26

{카테고리_이름} Garmin Fishfinder 240 Blue에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 240 Blue 50 페이지. Garmin fishfinder 160 blue owner's manual
Garmin Fishfinder 240 Blue에 대해서도 마찬가지입니다: 소유자 매뉴얼 (50 페이지), 소유자 매뉴얼 (50 페이지), 파일럿 매뉴얼 (12 페이지), 사양 (2 페이지), 사양 (2 페이지), 소유자 매뉴얼 (50 페이지)

페이지 인쇄

www.reelschematic.com

Unit Operation

Setup Menu: Chart/Tools Tabs

Scale — 'Overlay'

Scale — 'Basic'

Scale

The depth 'Scale' can be configured to display in four different modes: as an

'Overlay,' in the 'Corners,' as a 'Basic' Scale, or with 'No Scale.'

Tools Tab

'Noise Reject' tools. The 'Depth Line' tool is used to quickly identify a set

depth or to measure the depth of underwater objects. The 'Noise Reject' and

Scale — 'Corners'

'Flasher' tools are used to enhance the chart and help in identifying and

providing information about an underwater return. The 'Simulator' tool

is used to enhance the simulator mode by allowing you to customize the

simulated transducer selection. To access the 'Tools' tab, place the highlight

over it using the arrow keys.

Depth Line

to the Adjustment Bar.

Scale — 'No Scale'

The depth 'Scale' is displayed vertically along the right side of the chart.

To change the Scale Setting:

1. Highlight the 'Chart' tab on the Setup Menu.

2. Highlight the 'Scale' selection ﬁ eld and press ENTER.

3. Choose 'Overlay,' 'Corners,' 'Basic' or 'No Scale,' then press ENTER to

accept the selection.

The 'Tools' tab contains the 'Depth Line,' 'Flasher,' 'Simulator' and

When the 'Depth Line' tool is activated, a Depth Line selection is added

To activate the Depth Line:

1. Highlight the 'Tools' tab on the Setup Menu.

2. Highlight the 'Depth Line' selection ﬁ eld and press ENTER.

3. Select 'On' and press ENTER.