alkitronic M-ML 운영 및 유지보수 매뉴얼 - 페이지 4

{카테고리_이름} alkitronic M-ML에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. alkitronic M-ML 12 페이지.

페이지 인쇄

Operation and Maintenance Manual

1.3

Definition of Symbols

Incorrect or improper use, operation by un-

qualified personnel can result in serious physical

injury and material damage.

Non-compliance may result in damage to the

alkitronic® / Norwolf Torque Tools, its functions,

or the environment. Independent modifications

or changes on the product are not permissible.

Information for proper and safe operation. The

user is responsible for any third parties accessing

the work zone.

Practical advice and information to make work

easier.

2. Operation instructions

Depending on the working environment and the application

of the alkitronic® M-MT/Norwolf Missing Link, Z series or XCE

Link, existing locally regulations can prescribe protective

items (e.g. safety shoes, helmet etc.). Nonobservance of such

regulations can cause serious physical damage (e.g. bruises,

head injury from flying metal parts).

2.1 Preparing for bolting

Setting the rotation (tightening / loosening)

• The rotation is changed by reversing the torque tool by

180

. The bolting direction is marked at the housing.

• To tighten, make sure side engraved "TIGHTEN" is face up.

• To loosen, make sure side engraved "LOOSEN" is face up.

Tighten

(Rotation CW)

Insert drive and following

the direction of the en graved

TURN arrow, as input is turned,

output will also turn.

Loosen

(Rotation CCW)

Reaction

torque

TURN

(e.g. loosen)

2.2 Putting into operation alkitronic® M-MT /

Norwolf Missing Link

Place the alkitronic® M-MT/ Norwolf Missing Link on the appli-

cation by using the engraved arrows as a guide.

• Place the alkitronic® M-MT/ Norwolf Missing Link completely

on the bolt / nut (Fig.1/1 ).

• Ensure a stable reaction point (see page 6, item 3).

• Always keep the tool in axis line (2) to the bolt during the

bolting process.

Torque wrench

Example of bolting directions: tightening and loosening.

Check the rotation direction switch (3) on your Torque Wrench

to ensure correct rotation (cw = R, ccw = L, neutral position

= O).

Tightening or loosening - using the torque wrench,

see page 8, Item 4.2.

Multiplication of torque will depend on Link model.

1/2" or 3/4"

depending on version

Fig. 1

Fig. 2