alkitronic M-ML Panduan Pengoperasian dan Pemeliharaan - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Pompa Air alkitronic M-ML. alkitronic M-ML 12 halaman.
Halaman Cetak
Operation and Maintenance Manual
1.3
Definition of Symbols
Incorrect or improper use, operation by un-
qualified personnel can result in serious physical
injury and material damage.
Non-compliance may result in damage to the
alkitronic® / Norwolf Torque Tools, its functions,
or the environment. Independent modifications
or changes on the product are not permissible.
Information for proper and safe operation. The
user is responsible for any third parties accessing
the work zone.
Practical advice and information to make work
easier.
2. Operation instructions
Depending on the working environment and the application
of the alkitronic® M-MT/Norwolf Missing Link, Z series or XCE
Link, existing locally regulations can prescribe protective
items (e.g. safety shoes, helmet etc.). Nonobservance of such
regulations can cause serious physical damage (e.g. bruises,
head injury from flying metal parts).
2.1 Preparing for bolting
Setting the rotation (tightening / loosening)
• The rotation is changed by reversing the torque tool by
180
. The bolting direction is marked at the housing.
0
• To tighten, make sure side engraved "TIGHTEN" is face up.
• To loosen, make sure side engraved "LOOSEN" is face up.
Tighten
(Rotation CW)
Insert drive and following
the direction of the en graved
TURN arrow, as input is turned,
output will also turn.
Loosen
(Rotation CCW)
Reaction
torque
TURN
(e.g. loosen)
2.2 Putting into operation alkitronic® M-MT /
Norwolf Missing Link
Place the alkitronic® M-MT/ Norwolf Missing Link on the appli-
cation by using the engraved arrows as a guide.
• Place the alkitronic® M-MT/ Norwolf Missing Link completely
on the bolt / nut (Fig.1/1 ).
• Ensure a stable reaction point (see page 6, item 3).
• Always keep the tool in axis line (2) to the bolt during the
bolting process.
Torque wrench
1
2
Example of bolting directions: tightening and loosening.
Check the rotation direction switch (3) on your Torque Wrench
to ensure correct rotation (cw = R, ccw = L, neutral position
= O).
Tightening or loosening - using the torque wrench,
see page 8, Item 4.2.
Multiplication of torque will depend on Link model.
4
1/2" or 3/4"
depending on version
Fig. 1
3
3
Fig. 2