Garmin GPSMAP 76S 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Garmin GPSMAP 76S에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 76S 19 페이지. Gpsmap 76 series
Garmin GPSMAP 76S에 대해서도 마찬가지입니다: 적합성 선언 (1 페이지), 적합성 선언 (1 페이지), 사양 시트 (2 페이지)

페이지 인쇄

Quick Start

Using the Built-in Simulator

Highlighted Field

While learning the basic operation of the GPSMAP 76S, let' s put the unit

into Simulator Mode. The Simulator Mode is great for practicing with the unit

while inside and satellite signals are not available. When the GPSMAP 76S is in

Simulator Mode, the GPS receiver is turned off (this will help conserve battery

power) and the unit cannot be used for actual navigation.

NOTE: Do not try to navigate using the Simulator Mode. While in the

Simulator Mode, the GPS receiver is turned off. Any Satellite Signal

Strength Indicators displayed are only simulations and do not indicate

the strength of actual satellite signals.

Activating the Simulator Mode

Press the POWER key to turn the unit on. The Welcome Page will be

displayed, press the PAGE key twice to display the GPS Information Page.

Putting the GPSMAP 76S in Simulator Mode:

1. With the GPS Information Page displayed press the MENU key.

2. Using the ROCKER key, highlight 'Start Simulator' then press the ENTER key

to activate the simulator.

When the Simulator Mode is active, the message 'Simulating GPS' will be

displayed along the top of the GPS Information Page.