Garmin GPSMAP 76S 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} Garmin GPSMAP 76S에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GPSMAP 76S 19 페이지. Gpsmap 76 series
Garmin GPSMAP 76S에 대해서도 마찬가지입니다: 적합성 선언 (1 페이지), 적합성 선언 (1 페이지), 사양 시트 (2 페이지)

페이지 인쇄

Quick Start

Entering Data

Symbol Field

Mark Waypoint Page

There will be many times that you may need to enter data. An example is

naming a waypoint. The ROCKER key is used to navigate through menu items

and to enter data.

Let' s combine a couple of lessons. We will create a new waypoint, enter a

waypoint name, and assign a symbol to the waypoint.

The term 'Waypoint' may be new to you. You will ﬁ nd the term Waypoint is

used frequently when talking about navigation. A Waypoint is a position stored in

the unit' s memory. Waypoints are used for direct navigation or to build a Route.

Name Field

Creating or 'Marking' a waypoint with the GPSMAP 76S is easy. The unit has

to be turned on, and receiving at least three satellites (or simulating navigation)

to mark a waypoint.

Marking a waypoint:

1. Press and hold the ENTER/MARK key.

When the ENTER/MARK key is held down, the MARK function of the key

is activated and the GPSMAP 76S will capture it' s current position. The unit will

then display the Mark Waypoint Page. By default, the unit will assign a square as

the symbol and a number as the name and the 'OK' Button will be highlighted.

Pressing the ENTER key again would save the waypoint using the default name

and symbol, but let' s change them to something more meaningful.

Changing the symbol:

1. Using the ROCKER key, highlight the Symbol Field, then press ENTER.

2. Using the ROCKER key, highlight the 'Scenic Area' symbol, then press ENTER.