Garmin Colorado 400c 소유자 매뉴얼 - 페이지 38

{카테고리_이름} Garmin Colorado 400c에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Colorado 400c 48 페이지. Oregon series
Garmin Colorado 400c에 대해서도 마찬가지입니다: 소유자 매뉴얼 (40 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 소유자 매뉴얼 (48 페이지), 중요 안전 정보 (48 페이지), 소유자 매뉴얼 (26 페이지), (덴마크어) 매뉴얼 (48 페이지)

uStomIzInG the

olorado

Position Format Setup

The Position Format Setup page allows you to set your

position format, map datum, and map spheroid. Unless

you have a working knowledge of the position format

or grid for your map, it is recommended that you use

the default settings.

To access the Position Format Setup page select

Shortcuts > Setup > Position Format.

To access the Heading Setup page select Shortcuts >

Setup > Heading.

NOTE: Unless you have a working knowledge

of headings and North referencing, it is

recommended that you use the default settings.

Display—sets the units (Cardinal Letters, Degrees, or

Mils) used to show your heading.

North Reference—provides headings based on a true,

magnetic, grid, or specific user value north reference.

The Altimeter Setup page allows you to set up the

altimeter to self-calibrate each time you turn the

Colorado on, to function as a barometer, and to

continually save pressure trend data.

To set up the altimeter select Shortcuts > Setup >

altimeter.

auto Calibration—when turned on, elevation is

calibrated by the GPS elevation on the Colorado.

Barometer Mode—select Variable Elevation

(used when moving) or Fixed Elevation (used when

stationary, allowing the Altimeter to function as a

standard barometer).

Pressure Trending—select Save always to record

pressure data every 15 minutes, even when the

Colorado is turned off. Select Save When Power On

to record data only when the Colorado is turned on.

Colorado

Series Owner's Manual

™