- ページ 38

舶用機器 Garmin Colorado 400cのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Garmin Colorado 400c 48 ページ。 Oregon series
Garmin Colorado 400c にも：オーナーズマニュアル (40 ページ), クイック・リファレンス・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), オーナーズマニュアル (48 ページ), 重要な安全情報 (48 ページ), オーナーズマニュアル (26 ページ), (デンマーク語）マニュアル (48 ページ)

uStomIzInG the

olorado

Position Format Setup

The Position Format Setup page allows you to set your

position format, map datum, and map spheroid. Unless

you have a working knowledge of the position format

or grid for your map, it is recommended that you use

the default settings.

To access the Position Format Setup page select

Shortcuts > Setup > Position Format.

To access the Heading Setup page select Shortcuts >

Setup > Heading.

NOTE: Unless you have a working knowledge

of headings and North referencing, it is

recommended that you use the default settings.

Display—sets the units (Cardinal Letters, Degrees, or

Mils) used to show your heading.

North Reference—provides headings based on a true,

magnetic, grid, or specific user value north reference.

The Altimeter Setup page allows you to set up the

altimeter to self-calibrate each time you turn the

Colorado on, to function as a barometer, and to

continually save pressure trend data.

To set up the altimeter select Shortcuts > Setup >

altimeter.

auto Calibration—when turned on, elevation is

calibrated by the GPS elevation on the Colorado.

Barometer Mode—select Variable Elevation

(used when moving) or Fixed Elevation (used when

stationary, allowing the Altimeter to function as a

standard barometer).

Pressure Trending—select Save always to record

pressure data every 15 minutes, even when the

Colorado is turned off. Select Save When Power On

to record data only when the Colorado is turned on.

Colorado

Series Owner's Manual

™