Garmin Fishfinder 400C 소유자 매뉴얼 - 페이지 28

{카테고리_이름} Garmin Fishfinder 400C에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Fishfinder 400C 40 페이지. Flush mount kit instructions and template (multilingual)
Garmin Fishfinder 400C에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 중요 안전 정보 (48 페이지), 적합성 선언 (1 페이지), 설치 지침 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (30 페이지), 소유자 매뉴얼 (21 페이지)

페이지 인쇄

400c

ustomIzIng the

IshFInder

Changing the Sonar Settings

To change the sonar settings, on the Configure screen, highlight

Sonar, and press SElECt.

Color Scheme—choose white or blue. This affects the background

on all sonar screens, but does not change the Numbers or Temp Log

screens.

Fish Symbols—set how the Fishfinder 400C interprets suspended

targets.

The Fishfinder 400C does not interpret the sonar return

data. (default)

Suspended targets appear as symbols. Background sonar

information appears, making the distinction between fish

and structure easier.

Suspended targets appear as symbols with background

information shown. The target depth of each symbol is also

indicated.

Suspended targets appear as symbols. No background

information appears.

Suspended targets appear as symbols with no background

information shown. The target depth of each symbol is

indicated.

Scroll Speed—adjust the rate at which the sonar scrolls from

right to left (Ultrascroll, Fast, Medium, or Slow). If you have

a speed-capable transducer, select Auto to have the scroll speed

automatically adjust to your vessel's water speed.

Surface Noise—show or hide the sonar returns near the surface of

the water. Hide surface noise to help reduce clutter.

Whiteline—highlights the strongest signal from the bottom to help

identify its hardness or softness.

• Off—(default) Whiteline is disabled.

• High—the most sensitive setting. Almost all stronger returns

are highlighted in white.

• Medium—many stronger returns are highlighted in white.

• low—the least sensitive setting. Only the strongest returns

are highlighted in white.

Numbers—show or hide battery voltage, water temperature, or

water speed (if your transducer is capable).

NOtE: To show water temperature or water speed, change the

setting to Auto. If the connected transducer is capable, the data

is shown.

Fishfinder 400C Owner's Manual