Garmin GHP 10V 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Garmin GHP 10V에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GHP 10V 28 페이지. Marine autopilot system
Garmin GHP 10V에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (48 페이지), 설치 지침 매뉴얼 (20 페이지), 설치 지침 매뉴얼 (20 페이지)
페이지 인쇄
steering Patterns
‹
You are responsible for the safe operation of your boat. Do not begin a
pattern until you are certain that the water is clear of obstacles.
The autopilot can steer the boat in preset patterns for fishing, and it can
also perform other specialty maneuvers such as U-turns and man-overboard
retrieval. You can use the GHC 10 to begin pattern steering.
Pattern steering is not based on GPS, and it can be used without a GPS
device connected to the autopilot.
Zigzag Pattern
The zigzag pattern steers the boat from port to starboard and back, over a
specified time and angle, across your current heading.
setting Up the Zigzag Pattern
You can modify the amplitude and period of the zigzag pattern. The default
values are 30° and 1.5 minutes.
1. From the heading screen, select Menu > Pattern Steering > Zigzag >
Setup > Zigzag Amplitude.
2. Select
or
3. Select Done.
4. Select Setup > Zigzag Period.
5. Select
or
6. Select Done.
GHC 10 Owner's Manual
CaUTIOn
to set the amplitude in increments of 5°.
to set the period.
Following the Zigzag Pattern
1. From the heading screen, select Menu > Pattern Steering > Zigzag.
2. Select engage.
The autopilot follows the zigzag pattern, and the heading screen shows
the amplitude and period of the zigzag pattern
TIP: To quickly resume a pattern after you make a heading adjustment with
the helm or the soft keys
(page
3), select the center soft key twice.
Powerboat Autopilot Operation
.
➊
➀
5