Garmin GHP 10V Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Морское оборудование Garmin GHP 10V. Garmin GHP 10V 28 страниц. Marine autopilot system
Также для Garmin GHP 10V: Руководство по установке (48 страниц), Руководство по установке (20 страниц), Руководство по установке (20 страниц)

steering Patterns

‹

You are responsible for the safe operation of your boat. Do not begin a

pattern until you are certain that the water is clear of obstacles.

The autopilot can steer the boat in preset patterns for fishing, and it can

also perform other specialty maneuvers such as U-turns and man-overboard

retrieval. You can use the GHC 10 to begin pattern steering.

Pattern steering is not based on GPS, and it can be used without a GPS

device connected to the autopilot.

The zigzag pattern steers the boat from port to starboard and back, over a

specified time and angle, across your current heading.

setting Up the Zigzag Pattern

You can modify the amplitude and period of the zigzag pattern. The default

values are 30° and 1.5 minutes.

1. From the heading screen, select Menu > Pattern Steering > Zigzag >

Setup > Zigzag Amplitude.

2. Select

3. Select Done.

4. Select Setup > Zigzag Period.

5. Select

6. Select Done.

GHC 10 Owner's Manual

CaUTIOn

to set the amplitude in increments of 5°.

to set the period.

Following the Zigzag Pattern

1. From the heading screen, select Menu > Pattern Steering > Zigzag.

2. Select engage.

The autopilot follows the zigzag pattern, and the heading screen shows

the amplitude and period of the zigzag pattern

TIP: To quickly resume a pattern after you make a heading adjustment with

the helm or the soft keys

(page

3), select the center soft key twice.

Powerboat Autopilot Operation

➊

➀