AEG F55412VI0 사용자 설명서 - 페이지 10
{카테고리_이름} AEG F55412VI0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG F55412VI0 20 페이지.
AEG F55412VI0에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지)
페이지 인쇄
10
www.aeg.com
–
3. Press Option to change the setting.
4. Press the on/off button to confirm
the setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the release of
salt. The salt indicator does not come on.
= rinse aid dispenser
deactivated.
1. To enter the user mode press and
hold simultaneously Delay and Start
until the indicators
and
and the display is blank.
2. Press Delay
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting:
–
= Acoustic signal off.
–
= Acoustic signal on.
3. Press Delay to change the setting.
4. Press the on/off button to confirm
the setting.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
How to activate Multitab
Press Option until the indicator
on.
7.2 ÖKO PLUS
This option decreases the temperature
of the last rinsing phase and
consequently also the energy
consumption (approximately -25%).
Dishes can still be wet once the
programme is completed.
The duration of the programme will be
shorter.
,
start to flash
and
continues to
comes