Garmin Forerunner 210 설치 지침 매뉴얼 - 페이지 5
{카테고리_이름} Garmin Forerunner 210에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Forerunner 210 19 페이지. Gps-enabled sports watch
Garmin Forerunner 210에 대해서도 마찬가지입니다: 소유자 매뉴얼 (28 페이지), 빠른 시작 매뉴얼 (13 페이지), 중요 안전 지침 매뉴얼 (36 페이지), 사용 설명서 (25 페이지), 적합성 선언 (6 페이지), 빠른 시작 매뉴얼 (13 페이지), 소유자 매뉴얼 (18 페이지)
![Garmin Forerunner 210 설치 지침 매뉴얼](/uploads/products/server2/2330976/2330976.png)
16 Starting in one corner of the mounting location, place a nut plate
lining up the large and small holes.
The raised portion of the nut plate should fit into the larger hole.
17 Secure the nut plates to the mounting surface by fastening the included M3 screws
9
3.6 mm (
/
in.) holes.
64
18 Install the foam gasket
The pieces of the foam gasket have adhesive on the back. Make sure you remove the protective liner before
installing them on the device.
19 If you will not have access to the back of the device after you mount it, connect all necessary cables to the
device before placing it into the cutout.
To prevent corrosion of the metal contacts, cover unused connectors with the attached weather caps.
20 Apply marine sealant between the mounting surface and the device to properly seal and prevent leakage
behind the dashboard.
21 If you will have access to the back of the device, apply marine sealant around the cutout.
22 Place the device into the cutout.
23 Secure the device to the mounting surface using the included M4 screws
24 Wipe away all excess marine sealant.
25 Install the trim caps by snapping them in place around the edges of the device.
Connection Considerations
After connecting the cables to the device, tighten the locking rings to secure each cable.
on the back of the device.
NOTICE
on the back of the mounting surface,
through the smaller
.
5