Garmin GTX 327 파일럿 매뉴얼 - 페이지 6

{카테고리_이름} Garmin GTX 327에 대한 파일럿 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GTX 327 8 페이지. Mode a/c transponder
Garmin GTX 327에 대해서도 마찬가지입니다: 파일럿 매뉴얼 (8 페이지), 파일럿 매뉴얼 (8 페이지), 파일럿 매뉴얼 (8 페이지), 파일럿 매뉴얼 (4 페이지)

페이지 인쇄

FUNC

Changes the page shown on the right side of the display. Dis-

played data includes Pressure Altitude, Flight Time, Count Up timer, Count

Down timer, and may include Contrast and Display Brightness, depending

on configuration (as shown in the screens below):

PRESSURE ALT: Displays the altitude data supplied to the GTX 327

in feet, hundreds of feet (i.e., flight level), or meters, depending on

configuration.

FLIGHT TIME: Displays the Flight Time, which is controlled by the

START/STOP key or by a squat switch as configured during installation.

With squat switch control, the timer begins when lift off is sensed and

pauses when landing is sensed.

COUNT UP TIMER: Controlled by START/STOP and CLR keys.

COUNT DOWN TIMER: Controlled by START/STOP, CLR, and CRSR

keys. The initial Count Down time is entered with the 0 – 9 keys.

CONTRAST: This page is only displayed if manual contrast mode is

selected in Configuration Mode. Contrast is controlled by the 8 and 9 keys .

DISPLAY: This page is only displayed if manual backlighting mode is

selected in Configuration Mode. Backlighting is controlled by the 8 and 9

keys.

START/STOP

Starts and stops the Count Up and Count Down timers.

CRSR

Initiates entry of the starting time for the Count Down timer and

cancels transponder code entry.

CLR

Resets the Count Up and Count Down timers and cancels the

previous keypress during code selection.

Reduces Contrast and Display Brightness when the respective pages are

displayed. Also enters the number eight into the Count Down timer.

Increases Contrast and Display Brightness when the respective pages are

displayed. Also enters the number nine into the Count Down timer.