Garmin Sport PRO 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Garmin Sport PRO에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin Sport PRO 20 페이지. Dog collar device gps
Garmin Sport PRO에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지)

페이지 인쇄

Gasket

Front enclosure

Replacing the Dog Collar Device

Battery

Before you can replace the battery, you

must remove all dirt, water, and debris

from the device. You also need a small

Phillips screwdriver and the security

screwdriver included in the battery

replacement kit.

Remove the six screws from the top

plate, and remove the top plate.

Remove the two screws from the

battery plate, and remove the battery

plate.

Grip the battery connector wires close

to the connector, and pull the

connector parallel to the circuit board

to disconnect the battery connector

from the device.

Remove the battery.

The battery fits tightly. It may be

necessary to pry the battery out of the

back plate using a non-sharp, non-

metal object.

Install the new battery into the front

enclosure with the label side of the

battery facing up, and the leading edge

of the battery placed under the

charging contact ledge of the device.

Replace the battery plate, and replace

and tighten the two screws.

Verify the gasket is not damaged and

is completely seated in the groove.

With the new battery, connect the

battery connector to the device.

When properly installed, the connector

plug snaps into the port.

Replace the front plate, and replace

and tighten the six screws to secure

the front plate.

Verify the gasket is not sticking out of

the device.

Device Information