Brother DCP-7195DW 참조 매뉴얼 - 페이지 16
{카테고리_이름} Brother DCP-7195DW에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-7195DW 21 페이지. Laser all-in-one printer
Brother DCP-7195DW에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지)

Error Code
Problem and Recommended Solutions
TS-02
The wireless access point/router cannot be detected.
1. Check the following two points:
2. If you manually entered the SSID and security information (SSID/
TS-04
The Authentication/Encryption methods used by the selected wireless access
point/router are not supported by your machine.
Change the authentication and encryption method of the wireless access
point/router. Your machine supports the following authentication methods:
• WPA-Personal
TKIP or AES
• WPA2-Personal
TKIP or AES
• Open
WEP or None (without encryption)
• Shared key
WEP
If your problem is not solved, the SSID or network settings you entered may
be incorrect. Confirm the wireless network settings.
TS-05
The security information (SSID/Network Key) is incorrect.
Confirm the wireless security information (Authentication method/Encryption
method/Network Key).
TS-06
The machine cannot detect a WLAN access point/router that has WPS
enabled.
Confirm the wireless security information (Authentication method/Encryption
method/Network Key).
• Unplug the power to your wireless access point/router, wait for 10
seconds, and then plug it back in.
• If your WLAN access point/router is using MAC address filtering,
confirm that the MAC address of the Brother machine is allowed in the
filter.
authentication method/encryption method/Network Key), the information
may be incorrect.
Reconfirm the SSID and security information and re-enter the correct
information as necessary.
This device does not support a 5 GHz SSID/ESSID and you must select a
2.4 GHz SSID/ESSID. Make sure the access point/router is set to 2.4 GHz
or 2.4 GHz/5 GHz mixed mode.
10