Brother DCP-7195DW Reference Manual - Page 16

Browse online or download pdf Reference Manual for All in One Printer Brother DCP-7195DW. Brother DCP-7195DW 21 pages. Laser all-in-one printer
Also for Brother DCP-7195DW: Quick Setup Manual (2 pages)

Print Page

Error Code

Problem and Recommended Solutions

TS-02

The wireless access point/router cannot be detected.

1. Check the following two points:

2. If you manually entered the SSID and security information (SSID/

TS-04

The Authentication/Encryption methods used by the selected wireless access

point/router are not supported by your machine.

Change the authentication and encryption method of the wireless access

point/router. Your machine supports the following authentication methods:

• WPA-Personal

TKIP or AES

• WPA2-Personal

TKIP or AES

• Open

WEP or None (without encryption)

• Shared key

WEP

If your problem is not solved, the SSID or network settings you entered may

be incorrect. Confirm the wireless network settings.

TS-05

The security information (SSID/Network Key) is incorrect.

Confirm the wireless security information (Authentication method/Encryption

method/Network Key).

TS-06

The machine cannot detect a WLAN access point/router that has WPS

enabled.

Confirm the wireless security information (Authentication method/Encryption

method/Network Key).

• Unplug the power to your wireless access point/router, wait for 10

seconds, and then plug it back in.

• If your WLAN access point/router is using MAC address filtering,

confirm that the MAC address of the Brother machine is allowed in the

filter.

authentication method/encryption method/Network Key), the information

may be incorrect.

Reconfirm the SSID and security information and re-enter the correct

information as necessary.

This device does not support a 5 GHz SSID/ESSID and you must select a

2.4 GHz SSID/ESSID. Make sure the access point/router is set to 2.4 GHz

or 2.4 GHz/5 GHz mixed mode.