Brother DCP-J100 고급 사용자 설명서 - 페이지 15
{카테고리_이름} Brother DCP-J100에 대한 고급 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J100 44 페이지. Color multi-function printer
Brother DCP-J100에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (25 페이지), 사용자 설명서 (48 페이지), 제품 안전 매뉴얼 (18 페이지)
페이지 인쇄
Cancelling a Broadcast in progress
a
Press Menu, 3, 5.
The LCD will show the fax number or
name being dialled and the
Broadcasting job number.
b
Press a or b to choose the Broadcasting
job number.
c
Press OK.
The LCD will ask you the following
question:
1.Clear
2.Exit
d
To cancel the broadcast, press 1.
e
Press Stop/Exit.
Real Time Transmission
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for the machine to scan it into
memory. You can set Real Time TX to On
for all documents or Next Fax Only for the
next fax only.
Sending in real time for all faxes
a
Press
(FAX).
b
Press Menu, 3, 2, 3.
c
Press a or b to choose On (or Off).
Press OK.
d
Press 2 so you can continue sending
your fax.
e
Load your document.
f
Enter the fax number.
g
Press Mono Start or Colour Start.
Sending a fax (MFC models only)
Sending in real time for the next fax
3
only
a
Press
b
Press Menu, 3, 2, 3.
c
Press a or b to choose
Next Fax Only. Press OK.
d
Press a or b to choose Next Fax:Off
or Next Fax:On.
e
Press OK.
f
Press 2 so you can continue sending
your fax.
g
Load your document.
h
Enter the fax number.
3
i
Press Mono Start or Colour Start.
NOTE
• If you are sending a colour fax or if the
memory is full and you are sending a
monochrome fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
• If the memory is full, faxes from the
3
scanner glass cannot be sent until you
clear some of the memory.
(FAX).
3
3
11