Fujitsu ABYA12-24LBTH 설치 매뉴얼 - 페이지 19
{카테고리_이름} Fujitsu ABYA12-24LBTH에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ABYA12-24LBTH 21 페이지. Vrf system indoor unit floor / ceiling type
페이지 인쇄
• Refrigerant address example
(Example) ADDRESS : 30
OPERATION
ON
indicator lamp
1.0s
1.0s
(Green)
OFF
TIMER
ON
indicator lamp
0.5s 0.5s 0.5s 0.5s 0.5s 0.5s
(Orange)
OFF
ON
FILTER
indicator lamp
OFF
(Red)
• Setting details
Function
Item
number
01
Indoor unit address
02
Refrigeration address
For use with a remote controller, set all rotary switches to 0,
and refer to "7.1. Setting the address" for details.
All switches are set to 0 at the factory.
(2) Others
Indication pattern
Indicator Name
OPERATION
Function number; tens place
indicator lamp (Green)
(0.5s ON/0.5s OFF)
TIMER
Function number; ones place (0.5s
indicator lamp (Orange)
ON/0.5s OFF)
FILTER
Setting number: (0 - 9) (0.5s ON/0.5s
indicator lamp (Red)
OFF)
(Example) Function : 31, Setting number : 2
OPERATION
ON
indicator lamp
0.5s
0.5s
0.5s
0.5s 0.5s 0.5s
(Green)
OFF
ON
TIMER
indicator lamp
0.5s 0.5s
(Orange)
OFF
ON
FILTER
0.5s
0.5s
0.5s
0.5s
indicator lamp
OFF
(Red)
1 cycle 12 sec
1.0s
1.0s
1.0s
1.0s
1.0s
9 sec
OFF
Setting number
00~63
00~99
Indication pattern
1 cycle 12 sec
9 sec
11 sec
10 sec
8. MOUNT THE COVER PLATE AND
THE INTAKE GRILLE
] 1
8.1. Handling for the pipe take-off part
When the pipe is pulled out in the direction shown in the fi gure
below, cover the take-off part with material (putty or the like)
that will block it off.
UNDER CEILING TYPE
FLOOR CONSOLE TYPE
] 1
8.2. Mount the cover plate (Right)
(1) Cut a pipe exit hole in the right plate. This is only when
the pipe exits from the right side. (This operation is not
required when the protrusion is on the top or rear.)
Cover plate (Right) (Accessories)
Top
Rear
Right
En-19