a-gear OPM HOPM-PON-S 사용자 설명서 - 페이지 18

{카테고리_이름} a-gear OPM HOPM-PON-S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. a-gear OPM HOPM-PON-S 20 페이지. Pon optical power meter

A-GEAR World Wide Manufacturing

I n s t r u c ti o n s for No r m a l O p t ic a l Powe r M e te r Fu n c t i o n

6 .2 .

6.2 . 1 .

Press

button to open the instrument, use

the Optical Power Meter measurement, then press

function.

measurement for example:

6. 2 .2 .

Co nn e c t w it h t h e tes te d o p tic f ib e r

Clean the optic Fiber end-face, and connect with the PIN port on the instrument (SC/

FC/ST adaptor), noted with the type of the optic fiber adaptor, the non-matched

connecting will make the damage of the connector on the instrument and also make

the faulty of the measurement result.

E.g.: 1310nm measurement, after connect with the optic fiber, it will displaying

-20dBm, press

, set the -20dBm as the reference value, and it will also display

relative value (dB), see as following:

In order to get the loss between the two measurements, do another time

testing under the first relative output power. The relative value will be calculated

automatically. For example the second time testing of 1310nm output power is

-35dBm, the relative output power will be -15dBm. (relative output power=absolute

output power-reference value -15dBm=-35.00dBm- (-20.00dBm) see as following:

Button in this case, is to choose the wavelength. Take 1310nm

button and

to enter into the selected

OPM HOPM-PON-S

datasheet

to choose

a-gear.net

Раge 18 of 20