A-I-R ATOS VR 운영 매뉴얼 - 페이지 4

{카테고리_이름} A-I-R ATOS VR에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. A-I-R ATOS VR 17 페이지.

7. Connect the sail rings to the bracket at the top of the control frame by depressing the pin in the center

of that bracket (picture below). Make sure you hear the pin snap shut locking the rings in place.

Note : Be

very cautious of the flaps. Do NOT twist them or bend beyond a 20 degree angle.

Start the upper and lower zippers and close approximately half way.

8. Engage the nose mechanism and with the cam tool, push the connection closed and insert the pip pin

to secure it in place. The hook end of the latch must be through and behind the opposing piece to insert

the pip pin.

Note - place your hands as shown and be cautious in this process that you do not

allow your face to be close to and in front of the latch. If your hand or the tool were to slip off the

latch, it would spring open forcefully and be potentially, very damaging.

9. Walk to the rear of the keel, lift it and insert the stinger being sure hear both pins snap in place in the