AEG 61100MF-an 작동 및 설치 지침 - 페이지 19

{카테고리_이름} AEG 61100MF-an에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 61100MF-an 24 페이지. Glass ceramic cooking surface
AEG 61100MF-an에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (24 페이지), 사용 설명서 및 설치 지침 (24 페이지)

페이지 인쇄
AEG 61100MF-an 작동 및 설치 지침

Electrical connection

Prior to connecting the appliance to the mains, it is to be checked whether
the voltage given on the rating plate, that is the nominal voltage for the
appliance, matches the local mains voltage and the nominal voltage of the
combination appliance. The rating plate is on the bottom trim panel on the
glass ceramic cooking surface.
The mains connection to the built−in oven is to include a device that ena−
bles the appliance to be isolated with a contact separation of at least 3 mm
on all poles, e.g. a circuit breaker, earth leakage trip or fuse.
The cable loom with the 12−pole compact connector is to be joined to the
mating connector from the built−in oven.
Please ensure that the connector engages correctly.
After connecting the electrical supply, all cooking zones should be briefly
switched on one after the other at their maximum power, in order to test
whether they are operational.

Combination

The cooking surface can be combined with the following appliances:
Built−in oven:
Low level built−in oven:
The cooking surface is not permitted to be combined with:
Built−in switch box:
AEG type 53 . . .
AEG type 80 . . .
AEG type 53 . . .
AEG type 57 . . .
Installation Instructions
19