AEG 61100MF-an Інструкція з експлуатації та монтажу - Сторінка 19

Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Варильна поверхня AEG 61100MF-an. AEG 61100MF-an 24 сторінки. Glass ceramic cooking surface
Також для AEG 61100MF-an: Посібник з експлуатації та встановлення (24 сторінок), Інструкція з експлуатації та інструкція з монтажу (24 сторінок)

Electrical connection

Prior to connecting the appliance to the mains, it is to be checked whether

the voltage given on the rating plate, that is the nominal voltage for the

appliance, matches the local mains voltage and the nominal voltage of the

combination appliance. The rating plate is on the bottom trim panel on the

glass ceramic cooking surface.

The mains connection to the built−in oven is to include a device that ena−

bles the appliance to be isolated with a contact separation of at least 3 mm

on all poles, e.g. a circuit breaker, earth leakage trip or fuse.

The cable loom with the 12−pole compact connector is to be joined to the

mating connector from the built−in oven.

Please ensure that the connector engages correctly.

After connecting the electrical supply, all cooking zones should be briefly

switched on one after the other at their maximum power, in order to test

whether they are operational.

The cooking surface can be combined with the following appliances:

Built−in oven:

Low level built−in oven:

The cooking surface is not permitted to be combined with:

Built−in switch box:

AEG type 53 . . .

AEG type 80 . . .

AEG type 53 . . .

AEG type 57 . . .

Installation Instructions