Brother Work Smart MFC-J870dw 빠른 시작 매뉴얼 - 페이지 15
{카테고리_이름} Brother Work Smart MFC-J870dw에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J870dw 45 페이지. Work smart series inkjet all-in-one
Brother Work Smart MFC-J870dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 사양 (2 페이지), 기본 사용 설명서 (14 페이지)
페이지 인쇄
USB
For Macintosh USB interface users
14
Before you install
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
NOTE
For Mac OS X v10.6.0 to 10.6.7 users, upgrade to
Mac OS X v10.6.8 - 10.8.x.
15
Connect the USB cable
NOTE
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
a
Lift the scanner cover until it locks securely into
the open position.
(Mac OS X v10.6.8, 10.7.x, 10.8.x)
b
Connect the USB cable to the USB port
marked with a
USB port inside the machine, as shown in the
callout below.
c
Carefully guide the USB cable into the cable
channel and out the back of the machine.
Connect the cable to your Macintosh.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
NOTE
If you have connected a telephone line, make
sure it is placed it into the cable channel first.
Press down gently on each additional cable as
you guide it through the channel.
Macintosh
symbol a. You will find the
1
15