Brother Work Smart MFC-J870dw 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} Brother Work Smart MFC-J870dw에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother Work Smart MFC-J870dw 45 페이지. Work smart series inkjet all-in-one
Brother Work Smart MFC-J870dw에 대해서도 마찬가지입니다: 에어 프린트 매뉴얼 (12 페이지), 사양 (2 페이지), 기본 사용 설명서 (14 페이지)
페이지 인쇄
5
Check the print quality
a
When the preparation process has finished, the
Touchscreen shows Load paper and
press [OK].
Press OK.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press Yes to
finish the quality check and go to the next step.
If lines are missing, press No and follow the
steps on the Touchscreen.
OK
Poor
6
Set the date and time
The Touchscreen displays the date and time. You can
also add the current date and time to each fax you
send by setting your Station ID (see step 8).
a
Enter the last two digits of the year on the
Touchscreen, and then press OK.
(e.g. Enter 1 3 for 2013.)
b
Repeat for month and day.
c
Enter the time on the Touchscreen in 24-hour
format.
d
Press OK.
NOTE
• You can change date and time at any time. For
more information uuBasic User's Guide:
Setting the date and time
• If a prompt message appears on the
Touchscreen, read it and press OK to continue.
7