AEG 66301K-mn 설치 및 운영 지침 매뉴얼 - 페이지 23

{카테고리_이름} AEG 66301K-mn에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 66301K-mn 40 페이지. Ceramic glass hob
AEG 66301K-mn에 대해서도 마찬가지입니다: 사용자 설명서 (29 페이지)

페이지 인쇄

2. While the control lamp is flashing rapidly, use the

sensor panels to set the desired period of time for this cooking zone up

until the point where it automatically switches itself off (e.g.

15 minutes).

The safety cut-out function will be activated after several minutes

The control lamp will now flash more slowly and the remaining cooking

time will be shown in the display as it elapses. If the safety cut-out

function has been set for more than one cooking zone, the time dis-

played will be that for the cooking zone with the shortest period of

cooking time remaining. The control lamps for the other cooking zones

for which the safety cut-out function has been set will illuminate. To

display the remaining cooking time for any of these cooking zones, it

must be selected using the timer sensor panel, and the corresponding

control lamp will then flash rapidly.

To reset the remaining cooking time the desired cooking zone must be

selected using the timer sensor panel. The corresponding control lamp

will then flash more rapidly. The settings are reset using the

timer setting sensor panels.

After the set period of cooking time has elapsed the cooking zone au-

tomatically switches itself off, an acoustic signal sounds for two min-

utes and the timer display flashes 00.

3. To switch off the signal, touch the timer sensor panel.

To make the setting more quickly, touch any of the

ting sensor panels until the desired value is reached.

If the

timer setting sensor panel is actuated first, the time setting

will begin at 99 minutes, and if the

tuated first, the time setting will begin at 1 minute.

timer setting sensor panel is ac-

timersetting

timer set-