AEG 66301K-mn 설치 및 운영 지침 매뉴얼 - 페이지 24

{카테고리_이름} AEG 66301K-mn에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 66301K-mn 40 페이지. Ceramic glass hob
AEG 66301K-mn에 대해서도 마찬가지입니다: 사용자 설명서 (29 페이지)

페이지 인쇄

Switching off the safety cut-out function before it

has come to an end

There are two ways to switch off the safety cut-out function before it

has come to an end.

Switch off the cooking zone and timer simultaneously

1. Using the

cooking zone to zero: the cooking zone and timer will switch them-

selves off.

Switch off the timer – the cooking zone remains active

1. Select the desired cooking zone using the timer sensor panel. The corre-

sponding control lamp will then flash more rapidly.

2. Using the

– only the timer will switch itself off.

– the cooking zone will remain in operation.

Countdown timer

To be able to use the countdown timer the appliance must be switched

on, but all the cooking zones must be switched off.

1. Touch the timer sensor panel.

00 will be shown in the timer display.

2. Set the desired period of time using the

panels.

The countdown timer function will be activated after several minutes

and the remaining time will be displayed.

To reset the remaining time, touch the timer sensor panel and change

the setting using the

After the set period of time has elapsed an acoustic signal sounds and

the timer display flashes 00.

3. To switch off the signal, touch the timer sensor panel.

cooking setting selector sensor panel, reset the desired

timer setting sensor panel, set the timer to 00:

sensor panels for setting the timer.

timer setting sensor