AEG 68001KF-N 설치 및 운영 지침 매뉴얼 - 페이지 26

{카테고리_이름} AEG 68001KF-N에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 68001KF-N 36 페이지. Ceramic glass induction hob
AEG 68001KF-N에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (32 페이지)

페이지 인쇄

Installation Instructions

Safety instructions

The laws, ordinances, directives and standards in force in the country of

use are to be followed (safety regulations, proper recycling in accord-

ance with the regulations, etc.)

Installation may only be carried out by a qualified electrician.

The minimum distances to other appliances and units are to be ob-

served.

Anti-shock protection must be provided by the installation, for example

drawers may only be installed with a protective floor directly under-

neath the appliance.

The cut surfaces of the worktop are to be protected against moisture

using a suitable sealant.

The sealant seals the appliance to the work top with no gap.

When building in, protect the underside of the appliance from steam

and moisture, e.g. from a dishwasher or oven.

Avoid installing the appliance next to doors and under windows. Other-

wise hot cookware may be knocked off the rings when doors and win-

dows are opened.

WARNING!

Risk of injury from electrical current.

• The electrical mains terminal is live.

• Observe connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection through correct installation by a quali-

fied electrician.

• The appliance must be connected to the electrical supply by a quali-

fied electrician.

IMPORTANT!

Risk of injury from electrical current.

Loose and inappropriate plug and socket connections can make the ter-

minal overheat.

• Have the clamping joints correctedly installed by a qualified electri-

cian.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase connection, the appropri-

ate mains cable of type H05BB-F Tmax 90° (or higher) must be used.