AEG 68001KF-N Manual de instruções de instalação e funcionamento - Página 26

Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Hob AEG 68001KF-N. AEG 68001KF-N 36 páginas. Ceramic glass induction hob
Também para AEG 68001KF-N: Manual de instruções de instalação e funcionamento (32 páginas)

AEG 68001KF-N Manual de instruções de instalação e funcionamento

Installation Instructions

Safety instructions
The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accord-
ance with the regulations, etc.)
Installation may only be carried out by a qualified electrician.
The minimum distances to other appliances and units are to be ob-
served.
Anti-shock protection must be provided by the installation, for example
drawers may only be installed with a protective floor directly under-
neath the appliance.
The cut surfaces of the worktop are to be protected against moisture
using a suitable sealant.
The sealant seals the appliance to the work top with no gap.
When building in, protect the underside of the appliance from steam
and moisture, e.g. from a dishwasher or oven.
Avoid installing the appliance next to doors and under windows. Other-
wise hot cookware may be knocked off the rings when doors and win-
dows are opened.
1
WARNING!
Risk of injury from electrical current.
• The electrical mains terminal is live.
• Observe connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection through correct installation by a quali-
fied electrician.
• The appliance must be connected to the electrical supply by a quali-
fied electrician.
1
IMPORTANT!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can make the ter-
minal overheat.
• Have the clamping joints correctedly installed by a qualified electri-
cian.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropri-
ate mains cable of type H05BB-F Tmax 90° (or higher) must be used.
26