AEG 91900K 설치 및 운영 지침 매뉴얼 - 페이지 29

{카테고리_이름} AEG 91900K에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 91900K 40 페이지. Ceramic glass hob

What to do if ...

It is possible that faults have been caused by a minor error, which you

can correct yourself with the help of the following instructions. Do not

attempt any further repairs if the following instructions do not help in

each specific case.

Warning! Repairs to the appliance are only to be carried out by ap-

proved service engineers. Improperly effected repairs may result in con-

siderable risk to the user. If your appliance needs repairing, please

contact your specialist dealer or customer service.

What to do if ...

.... the cooking zones do not work?

Check whether

– the mains fuse (fuse box) is intact or the circuit breaker (at the

household fuse box) has tripped. If the circuit breaker trips or the

fuse blows several times, please call an approved electrician.

– the appliance has been properly switched on,

– the control indicators in the control panel are on,

– the correct cooking zone has been switched on,

– the cooking zones are set to the desired heat setting for cooking,

– the cooking zones have been switched off by the safety switch (see

section "Safety functions").

.... the cooking zones cannot be switched on?

Check whether

– the control panel is locked (see section "Locking the Control Panel").

– more than 10 seconds have elapsed between operating the On/Off

button and switching on the desired cooking zone, (see section

"Switching on the Appliance").

– the sensor fields are partially covered by a damp cloth or with liquid.

.... the display suddenly changes to _ or h for residual heat?

Check whether

– the On/Off button has been operated accidentally.

– the sensor fields are partially covered by a damp cloth, liquid or simi-

lar

– the safety switch has been activated.