AEG 91900K Installation And Operating Instructions Manual - Page 29
Browse online or download pdf Installation And Operating Instructions Manual for Hob AEG 91900K. AEG 91900K 40 pages. Ceramic glass hob
Print Page
What to do if ...
Rectifying faults
It is possible that faults have been caused by a minor error, which you
can correct yourself with the help of the following instructions. Do not
attempt any further repairs if the following instructions do not help in
each specific case.
1
Warning! Repairs to the appliance are only to be carried out by ap-
proved service engineers. Improperly effected repairs may result in con-
siderable risk to the user. If your appliance needs repairing, please
contact your specialist dealer or customer service.
What to do if ...
.... the cooking zones do not work?
Check whether
– the mains fuse (fuse box) is intact or the circuit breaker (at the
household fuse box) has tripped. If the circuit breaker trips or the
fuse blows several times, please call an approved electrician.
– the appliance has been properly switched on,
– the control indicators in the control panel are on,
– the correct cooking zone has been switched on,
– the cooking zones are set to the desired heat setting for cooking,
– the cooking zones have been switched off by the safety switch (see
section "Safety functions").
.... the cooking zones cannot be switched on?
Check whether
– the control panel is locked (see section "Locking the Control Panel").
– more than 10 seconds have elapsed between operating the On/Off
button and switching on the desired cooking zone, (see section
"Switching on the Appliance").
– the sensor fields are partially covered by a damp cloth or with liquid.
.... the display suddenly changes to _ or h for residual heat?
Check whether
– the On/Off button has been operated accidentally.
– the sensor fields are partially covered by a damp cloth, liquid or simi-
lar
– the safety switch has been activated.
65