AEG 949600686 지침서 - 페이지 15

{카테고리_이름} AEG 949600686에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 949600686 25 페이지. Aeg cooktop user manual

The hob unit can be mounted in any

type of kitchen with a table surface

whose thickness is between 28 mm and

40 mm.

Fixing

Unscrew the fixing brackets just enough

so they may be turmed. Fasten the

brackets to the worktop with a screw

driver.

Cut-out measurements

One rectangular hole is sawn out for the

hob combination chosen.

The depth of the cut-out for any unit is:

490 mm

Length of hole = sum of all units`

externally measured lenght, less 20 mm.

Mounting of Reinforcement

Beams

A reinforcement Beam, with supporting

flanges at each end, is included with

each two-burner unit. For unit

combinations, a reinforcement beam

must be used between each unit. It is not

necessary to attach the reinforcement

beam to the table surface, as it is held in

place by a specially designed moulding,

which is incorporated in the hob unit´s

flanges.