AEG 949600686 Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob AEG 949600686. AEG 949600686 25 stron. Aeg cooktop user manual

The hob unit can be mounted in any

type of kitchen with a table surface

whose thickness is between 28 mm and

40 mm.

Fixing

Unscrew the fixing brackets just enough

so they may be turmed. Fasten the

brackets to the worktop with a screw

driver.

Cut-out measurements

One rectangular hole is sawn out for the

hob combination chosen.

The depth of the cut-out for any unit is:

490 mm

Length of hole = sum of all units`

externally measured lenght, less 20 mm.

Mounting of Reinforcement

Beams

A reinforcement Beam, with supporting

flanges at each end, is included with

each two-burner unit. For unit

combinations, a reinforcement beam

must be used between each unit. It is not

necessary to attach the reinforcement

beam to the table surface, as it is held in

place by a specially designed moulding,

which is incorporated in the hob unit´s

flanges.