AEG 95604 G 작동 및 설치 지침 - 페이지 19
{카테고리_이름} AEG 95604 G에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 95604 G 26 페이지. Gas hob
AEG 95604 G에 대해서도 마찬가지입니다: 사용 설명서 (28 페이지), 운영 및 설치 매뉴얼 (22 페이지), 작동 및 설치 지침 (22 페이지)
페이지 인쇄
Fitting the hob to the worktop
Before fitting the hob into
the cut out, an adhesive seal
must be fitted to the
underside outside edge of the
hob. It is essential that no
gaps are left in this seal in
order to prevent spillage near
the hob seeping into the
cabinet below.
1) Remove the pan supports,
the burner caps and
crowns and turn the hob
upside down, taking care
the ignition candles are
not damaged in this
operation.
2) Place the sealing gasket
all around the glass top
edge as shown in the
diagram.
3) Fit the hob in the cut out
and push it down until
the glass top and the
working top make
contact, as shown in the
diagram.
FO 2108
FO 2107
A) Sealing gasket
Building in
A
19