AEG 95604 G Operating And Installation Instructions - Page 19

Browse online or download pdf Operating And Installation Instructions for Hob AEG 95604 G. AEG 95604 G 26 pages. Gas hob
Also for AEG 95604 G: Operating Instructions Manual (28 pages), Operating And Installation Manual (22 pages), Operating And Installation Instructions (22 pages)

Print Page

Fitting the hob to the worktop

Before fitting the hob into

the cut out, an adhesive seal

must be fitted to the

underside outside edge of the

hob. It is essential that no

gaps are left in this seal in

order to prevent spillage near

the hob seeping into the

cabinet below.

1) Remove the pan supports,

the burner caps and

crowns and turn the hob

upside down, taking care

the ignition candles are

not damaged in this

operation.

2) Place the sealing gasket

all around the glass top

edge as shown in the

diagram.

3) Fit the hob in the cut out

and push it down until

the glass top and the

working top make

contact, as shown in the

diagram.

FO 2108

FO 2107

A) Sealing gasket

Building in