Brother GTX 사용자 참조 설명서 - 페이지 8

{카테고리_이름} Brother GTX에 대한 사용자 참조 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother GTX 16 페이지. Step by step photo instructions
Brother GTX에 대해서도 마찬가지입니다: 포장 풀기 매뉴얼 (17 페이지), 스탠드 조립 (5 페이지)

페이지 인쇄
Brother GTX 사용자 참조 설명서
Missing Nozzles & Deflection Cleanings & Flash Firing
The Missing horizontal pins on the test print pattern represents the print head nozzles that are
blocked with debris and therefore not showing up. Depending on how many nozzles/pins
are missing, will require you to perform one of the print head cleaning functions as shown
below.
NOTE: This cleaning process can be used for CMYK or White
If Missing
If Missing
> Repeat the same process as needed up to 3 times and ensure all maintenance has been performed
such as cleaning the cap and wiper blade. Also check that the the wiper cassette is fresh and still has
moisture. If there is no improvement by the 3rd time, please contact your dealer or service centre.
Deflection & Flash Firing
If
CLICK
If this does not resolve the matter please
contact your dealer or Brother representative
for further troubleshooting.
8
6
1'
1'
For 1 Minute
Only a few
10 or More
Deflection appears as odd bunched up or gapped lines -
sometimes the horizontal bars will appear blurred and
staggered.
When this is present you will want to perform a Flash Fire
Cleaning.
ALIGN
NO WRINKLES
Then
Then
PUSH to ROLL
then
On the Panel Select
Head Cleaning
Flash Cleaning
Choose the Affected Colour/Channel
Press OK
Perform Another Nozzle Test Print
On the Panel Select
Head Cleaning
Powerful Cleaning
Choose the Affected Colour/
Channel ↓
Press OK
Perform Another Nozzle Test Print
On the Panel Select
Head Cleaning
Super Cleaning
Choose the Affected Colour/Channel
Press OK
Perform Another Nozzle Test Print