Brother GTX pro 빠른 사용 설명서 - 페이지 12

{카테고리_이름} Brother GTX pro에 대한 빠른 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother GTX pro 15 페이지. Garment printer
Brother GTX pro에 대해서도 마찬가지입니다: 참조 매뉴얼 (13 페이지), 사용자 설명서 (16 페이지), 설정 매뉴얼 (40 페이지)

페이지 인쇄

ADDITIONAL WEEKLY MAINTENANCE

Visual inspection is important to keep your printer

up and running. Inspect all the moving parts of the

machine and also check for leakage of ink.

Also, please follow all the instructions which may

appear on the display of the printer.

When you see a yellow number, push the right

arrow key to know what you have to do to clear the

Error/Warning message.

INTERNAL CLEANING OF THE PRINTER

If the inside of your printer is covered with INK MIST, perform a thorough CLEANING.

> Always use this menu to perform cleanings or replace parts:

• Enter Maintenance mode on the machine display panel to move

the carriage to the right and have access to all components needing

inspection and cleaning.

• With the Clean Stick R dipped in Cleaning Solution, wipe away

the stains on the 4 Carriage Rollers

[There is 1 more Roller hidden just below the Roller 1]

• Move the carriage from side to side to wipe all around the 4 rollers

completely.

• Clean the Carriage Guide Shaft and the 3 sides

of the Roller Guide with a lint free cloth moistened with a

lower]

small amount of Isopropyl Alcohol [95°]

• Do not use alcohol on parts other than the carriage guide shaft and

the roller guide.

• After cleaning the Carriage Guide Shaft with alcohol, immediately

apply a proper amount of Molykote 30 Grease onto the Carriage

Guide Shaft only

• Remove 3 screws to take out the encoder metal cover. With your

lint free cloth moistened with Alcohol, carefully clean both sides

of the Encoder Strip.

• Perform a CR Speed Adjustment.

Menu > Printer Setting > CR Speed Adjustment > OK

• Print out a Nozzle Check pattern and do a Nozzle Cleaning if

necessary.

Maintenance

[never on the Roller Guide].

Maintenance Part Clean/Replace

[upper, front, and